Я действительно изо всех сил пытаюсь решить проблему с моим шейдером SSAO и могу отчаянно использовать некоторую помощь. В основном шейдер, кажется, работает с некоторыми объектами, но на других выглядит очень плохо. Из приведенного ниже вы можете видеть, что сфера выглядит правильно, но куб, кажется, делает окклюзию нормалей, которые он не должент. Вот скриншот:

Я основываю свои шейдеры на этом уроке:http://devmaster.net/posts/3095/shader-effects-screen-space-ambient-occlusion

В моей цепочке рендеринга я отрисовываю 2 цели рендеринга, которые позже используются в некоторых пост-процессных эффектах. Один из них хранит положение и глубину. Другой хранит нормали. Обе цели являются плавающими текстурами.

Вот скриншот каждого из шагов.

Это моя позиция / глубина шейдера:

Вершинный шейдер:

varying vec4 vPosition;
.....
vPosition = mvPosition;

Frag Shader:

uniform float linearDepth; //Cam far - cam near
varying vec4 vPosition;
...
float ld = length(vPosition) / linearDepth;
gl_FragColor = vec4(vPosition.x, vPosition.y, vPosition.z, ld);

Это нормальный шейдер:

Вершинный шейдер:

varying vec3 vNormal;
...
vec3 transformedNormal = normalMatrix * objectNormal;
vNormal = transformedNormal;

Фрагмент шейдера:

gl_FragColor = vec4( normalize( vNormal ).xyz, 1.0);

Вот мой фрагментный шейдер SSAO:

uniform sampler2D tDiffuse;    // The original scene texture
uniform sampler2D tPositions;    // View space position data
uniform sampler2D tNormals;    // View space normal vectors
uniform sampler2D tNoise;    // Normalmap to randomize the sampling kernel
uniform vec2 texelSize;

/// Occluder bias to minimize self-occlusion.
uniform float occluderBias;

/// Specifies the size of the sampling radius.
uniform float samplingRadius;

uniform float onlyAO;

/// 
/// Ambient occlusion attenuation values.
/// These parameters control the amount of AO calculated based on distance
/// to the occluders. You need to play with them to find the right balance.
///
/// .x = constant attenuation. This is useful for removing self occlusion. When
///         set to zero or a low value, you will start to notice edges or wireframes
///         being shown. Typically use a value between 1.0 and 3.0.
///
///    .y = linear attenuation. This provides a linear distance falloff.
/// .z = quadratic attenuation. Smoother falloff, but is not used in this shader.
/// 
uniform vec2 attenuation;


/// 
/// Varying variables.
/// 
varying vec2 vUv;

/// 
/// Sample the ambient occlusion at the following UV coordinate.
/// 
/// 3D position of the source pixel being tested.
/// Normal of the source pixel being tested.
/// UV coordinate to sample/test for ambient occlusion.
/// Ambient occlusion amount.
float SamplePixels (vec3 srcPosition, vec3 srcNormal, vec2 uv)
{
    // Get the 3D position of the destination pixel
    vec3 dstPosition = texture2D(tPositions, uv).xyz;

    // Calculate ambient occlusion amount between these two points
    // It is simular to diffuse lighting. Objects directly above the fragment cast
    // the hardest shadow and objects closer to the horizon have minimal effect.
    vec3 positionVec = dstPosition - srcPosition;
    float intensity = max(dot(normalize(positionVec), srcNormal) - occluderBias, 0.0);

    // Attenuate the occlusion, similar to how you attenuate a light source.
    // The further the distance between points, the less effect AO has on the fragment.
    float dist = length(positionVec);
    float attenuation = 1.0 / (attenuation.x + (attenuation.y * dist));

    return intensity * attenuation;
}


/// 
/// Fragment shader entry.
/// 
void main ()
{
    // Get position and normal vector for this fragment
    vec3 srcPosition = texture2D(tPositions, vUv).xyz;
    vec3 srcNormal = texture2D(tNormals, vUv).xyz;
    vec2 randVec = normalize(texture2D(tNoise, vUv).xy * 2.0 - 1.0);
    float srcDepth = texture2D(tPositions, vUv).w;

    // The following variable specifies how many pixels we skip over after each
    // iteration in the ambient occlusion loop. We can't sample every pixel within
    // the sphere of influence because that's too slow. We only need to sample
    // some random pixels nearby to apprxomate the solution.
    //
    // Pixels far off in the distance will not sample as many pixels as those close up.
    float kernelRadius = samplingRadius * (1.0 - srcDepth);

    // Sample neighbouring pixels
    vec2 kernel[4];
    kernel[0] = vec2(0.0, 1.0);        // top
    kernel[1] = vec2(1.0, 0.0);        // right
    kernel[2] = vec2(0.0, -1.0);    // bottom
    kernel[3] = vec2(-1.0, 0.0);    // left

    const float Sin45 = 0.707107;    // 45 degrees = sin(PI / 4)

    // Sample from 16 pixels, which should be enough to appromixate a result. You can
    // sample from more pixels, but it comes at the cost of performance.
    float occlusion = 0.0;
    for (int i = 0; i < 4; ++i)
    {
        vec2 k1 = reflect(kernel[i], randVec);
        vec2 k2 = vec2(k1.x * Sin45 - k1.y * Sin45,
                       k1.x * Sin45 + k1.y * Sin45);
        k1 *= texelSize;
        k2 *= texelSize;

        occlusion += SamplePixels(srcPosition, srcNormal, vUv + k1 * kernelRadius);
        occlusion += SamplePixels(srcPosition, srcNormal, vUv + k2 * kernelRadius * 0.75);
        occlusion += SamplePixels(srcPosition, srcNormal, vUv + k1 * kernelRadius * 0.5);
        occlusion += SamplePixels(srcPosition, srcNormal, vUv + k2 * kernelRadius * 0.25);
    }

    // Average and clamp ambient occlusion
    occlusion /= 16.0;
    occlusion = clamp(occlusion, 0.0, 1.0);

// Blend the two 
vec3 colour =  texture2D(tDiffuse, vUv).xyz;
//colour = clamp(colour - occlusion, 0.0, 1.0);

occlusion = 1.0 - occlusion;

//gl_FragColor.xyz = pow(colour, vec3(1.0 / 2.2));
if ( onlyAO == 1.0 )
    gl_FragColor.xyz = vec3( occlusion, occlusion, occlusion );
else if ( onlyAO == 2.0 )
    gl_FragColor.xyz = vec3( srcNormal.x, srcNormal.y, srcNormal.z );
else if ( onlyAO == 3.0 )
    gl_FragColor.xyz = vec3( srcDepth, srcDepth, srcDepth );
else
{
    //// Blend the two 
    //colour = clamp(colour - occlusion, 0.0, 1.0); 

    //// Apply gamma correction 
    //gl_FragColor.xyz = pow(colour, vec3(1.0 / 2.2)); 
    //gl_FragColor.w = 1.0;

    gl_FragColor.xyz = colour * occlusion;
}

gl_FragColor.w = 1.0;

}