Есть ли NTP-сервер, который я должен использовать при использовании сервиса Amazon EC2 для борьбы со смещением часов?

Я использую AWS и нахожусь на сервере EC2 ...

[dalvarado@mymachine ~]$ uname -a
Linux mydomain.org 3.14.33-26.47.amzn1.x86_64 #1 SMP Wed Feb 11 22:39:25 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux

Мои часы отключены на минуту ро, так что, несмотря на то, что у меня уже установлен и работает NTPD

[dalvarado@mymachine ~]$ sudo service ntpd status
ntpd (pid  22963) is running...

Казалось бы, пакеты ntp заблокированы или есть какая-то другая проблема, потому что я получаю эту ошибку ...

[dalvarado@mymachine ~]$ sudo ntpdate pool.ntp.org
 2 Apr 16:43:50 ntpdate[23748]: no server suitable for synchronization found

Кто-нибудь знает с AWS, есть ли другой сервер, с которым я должен связаться для получения информации о NTP, или есть ли другие дополнительные конфигурации, которые мне нужны?

Спасибо, Дэйв

Редактировать: Включая вывод из комментария ...

[dalvarado@mymachine ~]$ sudo ntpq -p
     remote           refid      st t when poll reach   delay   offset  jitter
==============================================================================
 173.44.32.10    .INIT.          16 u    - 1024    0    0.000    0.000   0.000
 deekayen.net    .INIT.          16 u    - 1024    0    0.000    0.000   0.000
 dhcp-147-115-21 .INIT.          16 u    - 1024    0    0.000    0.000   0.000
 time-b.timefreq .INIT.          16 u    - 1024    0    0.000    0.000   0.000

Второе редактирование:

Ниже приведено содержимое файла /etc/ntp.conf

# For more information about this file, see the man pages
# ntp.conf(5), ntp_acc(5), ntp_auth(5), ntp_clock(5), ntp_misc(5), ntp_mon(5).

driftfile /var/lib/ntp/drift

# Permit time synchronization with our time source, but do not
# permit the source to query or modify the service on this system.
restrict default nomodify notrap nopeer noquery

# Permit all access over the loopback interface.  This could
# be tightened as well, but to do so would effect some of
# the administrative functions.
restrict 127.0.0.1 
restrict ::1

# Hosts on local network are less restricted.
#restrict 192.168.1.0 mask 255.255.255.0 nomodify notrap

# Use public servers from the pool.ntp.org project.
# Please consider joining the pool (http://www.pool.ntp.org/join.html).
server 0.amazon.pool.ntp.org iburst
server 1.amazon.pool.ntp.org iburst
server 2.amazon.pool.ntp.org iburst
server 3.amazon.pool.ntp.org iburst

#broadcast 192.168.1.255 autokey    # broadcast server
#broadcastclient            # broadcast client
#broadcast 224.0.1.1 autokey        # multicast server
#multicastclient 224.0.1.1      # multicast client
#manycastserver 239.255.254.254     # manycast server
#manycastclient 239.255.254.254 autokey # manycast client

# Enable public key cryptography.
#crypto

includefile /etc/ntp/crypto/pw

# Key file containing the keys and key identifiers used when operating
# with symmetric key cryptography. 
keys /etc/ntp/keys

# Specify the key identifiers which are trusted.
#trustedkey 4 8 42

# Specify the key identifier to use with the ntpdc utility.
#requestkey 8

# Specify the key identifier to use with the ntpq utility.
#controlkey 8

# Enable writing of statistics records.
#statistics clockstats cryptostats loopstats peerstats

# Enable additional logging.
logconfig =clockall =peerall =sysall =syncall

# Listen only on the primary network interface.
interface listen eth0
interface ignore ipv6

# Disable the monitoring facility to prevent amplification attacks using ntpdc
# monlist command when default restrict does not include the noquery flag. See
# CVE-2013-5211 for more details.
# Note: Monitoring will not be disabled with the limited restriction flag.
disable monitor

и ниже вывод "ntpq -p"

sudo ntpq -p
     remote           refid      st t when poll reach   delay   offset  jitter
==============================================================================
 173.44.32.10    .INIT.          16 u    - 1024    0    0.000    0.000   0.000
 deekayen.net    .INIT.          16 u    - 1024    0    0.000    0.000   0.000
 dhcp-147-115-21 .INIT.          16 u    - 1024    0    0.000    0.000   0.000
 time-b.timefreq .INIT.          16 u    - 1024    0    0.000    0.000   0.000

Ответы на вопрос(0)

Ваш ответ на вопрос