Lectura y escritura de datos binarios sobre puerto serie.
Así que busqué, y no pude encontrar exactamente lo que necesitaba. Necesito ayuda para leer y escribir datos binarios a través de un puerto serie, y agradecería cualquier consejo que pueda tener. Tenga en cuenta que hice una pregunta similar a esta anteriormente cuando estaba en una etapa diferente de este proyecto.
A continuación se presentan los programas. El primer programa abre un archivo "test.jpg", lo lee en modo binario y almacena el resultado en un búfer. Luego cierra el archivo, y se supone que envía ese archivo a través de un puerto serie.
El segundo programa crea un archivo llamado "testout.jpg", y se supone que lee los datos enviados desde el programa anterior.
Tengo el presentimiento de que el problema en mi código está en el segundo programa. ¿Quizás necesito usar fread para eso también? Lo intenté, pero no puedo descubrir cómo implementarlo para un puerto serie ya que soy relativamente nuevo en programación.
Muchas gracias por tu tiempo.
Escritura en serie:
#include <stdio.h> /* Standard input/output definitions */
#include <string.h> /* String function definitions */
#include <unistd.h> /* UNIX standard function definitions */
#include <fcntl.h> /* File control definitions */
#include <errno.h> /* Error number definitions */
#include <termios.h> /* POSIX terminal control definitions */
#include <stdlib.h>
int main()
{
//writing
int writeport = open_port("/dev/ttyUSB0");
//open file
FILE *file;
char *buffer;
int fileLen;
file = fopen("test.jpg", "rb");
//get file size
fseek(file, 0, SEEK_END);
fileLen = ftell(file);
fseek(file, 0, SEEK_SET);
buffer = (char *)malloc(fileLen + 1);
//read file contents
fread(buffer, fileLen, 1, file);
fclose(file);
int n = write(writeport, buffer, fileLen + 1);
if (n < 0)
fputs("write() of bytes failed!\n", stderr);
//closing ports
close(writeport);
}
int open_port(char str[])
{
int fd = open(str, O_RDWR | O_NOCTTY | O_NONBLOCK); // ?? NDELAY or NONBLOCK?
if (fd == -1)
{
perror("open_port: Unable to open /dev/ttyS0 - ");
}
else
fcntl(fd, F_SETFL, 0);
struct termios options;
tcgetattr(fd, &options); //this gets the current options set for the port
// setting the options
cfsetispeed(&options, B9600); //input baudrate
cfsetospeed(&options, B9600); // output baudrate
options.c_cflag |= (CLOCAL | CREAD); // ?? enable receicer and set local mode
//options.c_cflag &= ~CSIZE; /* mask the character size bits */
options.c_cflag |= CS8; /* select 8 data bits */
options.c_lflag &= ~(ICANON | ECHO | ECHOE | ISIG); // choosing raw input
options.c_iflag &= ~INPCK; // disable parity check
options.c_iflag &= ~(IXON | IXOFF | IXANY); // disable software flow control
options.c_oflag |= OPOST; // ?? choosing processed output
options.c_cc[VMIN] = 0; // Wait until x bytes read (blocks!)
options.c_cc[VTIME] = 0; // Wait x * 0.1s for input (unblocks!)
// settings for no parity bit
options.c_cflag &= ~PARENB;
options.c_cflag &= ~CSTOPB;
options.c_cflag &= ~CSIZE;
options.c_cflag |= CS8;
tcsetattr(fd, TCSANOW, &options); //set the new options ... TCSANOW specifies all option changes to occur immediately
return (fd);
}
Lectura en serie:
#include <stdio.h> /* Standard input/output definitions */
#include <string.h> /* String function definitions */
#include <unistd.h> /* UNIX standard function definitions */
#include <fcntl.h> /* File control definitions */
#include <errno.h> /* Error number definitions */
#include <termios.h> /* POSIX terminal control definitions */
int main()
{
//reading
int readport = open_port("/dev/ttyUSB1");
//open resultant file
FILE *file;
//system("rm testout.jpg");
file = fopen("testout.jpg", "wb");
//trying to read one character at a time
char buff;
int n = 1;
while (n > 0)
{
n = read(readport, &buff, 1);
//printf("%c", buff, buff);
**//I tried these three methods, with little success**
//fprintf(file, "%c", buff);
//fwrite(&buff, 1, 1, file);
//write(file, &buff, 1);
}
//closing ports
close(readport);
fclose(file);
}
int open_port(char str[])
{
int fd = open(str, O_RDWR | O_NOCTTY | O_NONBLOCK); // ?? NDELAY or NONBLOCK?
if (fd == -1)
{
perror("open_port: Unable to open /dev/ttyS0 - ");
}
else
fcntl(fd, F_SETFL, 0);
struct termios options;
tcgetattr(fd, &options); //this gets the current options set for the port
// setting the options
cfsetispeed(&options, B9600); //input baudrate
cfsetospeed(&options, B9600); // output baudrate
options.c_cflag |= (CLOCAL | CREAD); // ?? enable receicer and set local mode
//options.c_cflag &= ~CSIZE; /* mask the character size bits */
options.c_cflag |= CS8; /* select 8 data bits */
options.c_lflag &= ~(ICANON | ECHO | ECHOE | ISIG); // choosing raw input
options.c_iflag &= ~INPCK; // disable parity check
options.c_iflag &= ~(IXON | IXOFF | IXANY); // disable software flow control
options.c_oflag |= OPOST; // ?? choosing processed output
options.c_cc[VMIN] = 0; // Wait until x bytes read (blocks!)
options.c_cc[VTIME] = 0; // Wait x * 0.1s for input (unblocks!)
// settings for no parity bit
options.c_cflag &= ~PARENB;
options.c_cflag &= ~CSTOPB;
options.c_cflag &= ~CSIZE;
options.c_cflag |= CS8;
tcsetattr(fd, TCSANOW, &options); //set the new options ... TCSANOW specifies all option changes to occur immediately
return (fd);
}